Manufacturer > Merit Medical > Devices > ASAP® and ASAPLP™ Aspiration Catheters

ASAP® and ASAPLP™ Aspiration Catheters

Device-Type

Aspiration Catheter

Manufacturer

Merit Medical


POWERFUL CLOT ASPIRATION

The ASAP and ASAPLP Aspiration Catheter kits provide the quality products you need to deliver powerful clot aspiration, restoring and improving blood flow in thrombosed vessels. Each kit contains:

  • 1 – ASAP or ASAPLP aspiration catheter*
  • 1 – Extension Tubing Set with One-Way Stopcock, 21.5 cm total length
  • 1 – RXP® Flushing Syringe, 4 mL
  • 2 – VacLok® Vacuum Pressure Syringe, 30 mL
  • 1 – MicroStop Fluid Collection Basin with Lid
  • 2 – Pore Filter Baskets, 70 micron


Features and Benefits

Remove Clots Safely, Quickly, and Effectively

  • Single extrusion, rapid-exchange aspiration catheters to maneuver through blockages
  • 100% stainless steel braided, kink resistant catheter shaft to break through clots
  • Tapered tip for smooth catheter-to-wire transitions
  • Large aspiration lumen for powerful clot removal


Safety informations

WARNINGS

Do not use a bent, kinked or damaged catheter as this may lead to vessel injury and/or an inability to advance or withdraw the catheter. Do not advance the guide wire if resistance is met. Do not place more than 60mls of fluid in the MicroStop™ fluid collection basin. The ASAP Aspiration catheter must be used with a guide catheter with a minimum internal diameter of 0.070”/1.78mm. Do NOT flush the system while the catheter is still inside the patient vasculature. 


CONTRAINDICATIONS

Do not use in vessels less than 2.0mm in diameter. The venous system. The removal of fibrous, adherent or calcified material (i.e. chronic clot, atherosclerotic plaque) Not for use in the cerebral vasculature.

Potential adverse events

Potential complications include, but are not limited to: Local or systemic infection; local hematomas; intimal disruption; arterial dissection; perforation and vessel rupture; arterial thrombosis; distal embolization of blood clots and plaque; arterial spasm; arteriovenous fistula formation; catheter fracture with tip separation and distal embolization; acute myocardial infarction; emergent surgery; death; abrupt closure of total occlusion of treated graft or vessel; distal embolization of debris resulting in pulmonary compromise and/or limb ischemia; death, myocardial infarction; coronary or bypass graft thrombosis or occlusion, myocardial ischemia; stroke/CVA; emergent or non-emergent fibrillation; hemorrhage; hypotension; pseudo aneurysm at access site. Risks normally associated with percutaneous diagnostic and/or interventional procedures.

Device Documents

Related Device SKUs

* Select 2 or more (upto 4) SKUs to compare.
SKU Name Device SKUs Model FRENCH SIZE (F) CATHETER USABLE WORKING LENGTH SINGLE POSITIONING MARKER (I) DOUBLE POSITIONING MARKER (II) TEMPORARY SHARPS HOLDER TRIPLE POSITIONING MARKER(III) FILTER RAPID EXCHANGE LENGTH SEAL-TIGHT LID RADIOPAQUE MARKER BAND GUIDE WIRE COMPATIBILITY HYDROPHILIC COATING STERILIZATION LATEX FREE
Aspiration Catheter
ASAP100 GCID 6F ≥ 0.070" (1.78 mm) 55" (140 cm) 90 cm 100 cm - 110 cm - 12 cm - 2 mm Proximal to Catheter Tip 0.014" (0.36 mm) 20 cm Distal Catheter ETO Yes
Aspiration Catheter
MDR-ASAP100 GCID 6F ≥ 0.070" (1.78 mm) 55" (140 cm) 90 cm 100 cm - 110 cm - 12 cm - 2 mm Proximal to Catheter Tip 0.014" (0.36 mm) 20 cm Distal Catheter ETO Yes
Aspiration Catheter
MDR-ASAPLP GCID 6F ≥ 0.066" (1.68 mm) 60" (145 cm) 90 cm 100 cm - 110 cm - 20 cm - 2 mm Proximal to Catheter Tip 0.014" (0.36 mm) 30 cm Distal Catheter ETO Yes
Aspiration Catheter
MMSF200 - - - - No - 70 Micron - Yes - - - - -
Aspiration Catheter
ASAPLP GCID 6F ≥ 0.066" (1.68 mm) 60" (145 cm) 90 cm 100 cm - 110 cm - 20 cm - 2 mm Proximal to Catheter Tip 0.014" (0.36 mm) 30 cm Distal Catheter - -
device-thumbnail
Aspiration Catheter
  • Model : ASAP100
  • Procedure : -
  • FRENCH SIZE (F) : GCID 6F ≥ 0.070" (1.78 mm)
  • CATHETER USABLE WORKING LENGTH : 55" (140 cm)
  • SINGLE POSITIONING MARKER (I) : 90 cm
  • DOUBLE POSITIONING MARKER (II) : 100 cm
  • TEMPORARY SHARPS HOLDER : -
  • TRIPLE POSITIONING MARKER(III) : 110 cm
  • FILTER : -
  • RAPID EXCHANGE LENGTH : 12 cm
  • SEAL-TIGHT LID : -
  • RADIOPAQUE MARKER BAND : 2 mm Proximal to Catheter Tip
  • GUIDE WIRE COMPATIBILITY : 0.014" (0.36 mm)
  • HYDROPHILIC COATING : 20 cm Distal Catheter
  • STERILIZATION : ETO
  • LATEX FREE : Yes
device-thumbnail
Aspiration Catheter
  • Model : MDR-ASAP100
  • Procedure : -
  • FRENCH SIZE (F) : GCID 6F ≥ 0.070" (1.78 mm)
  • CATHETER USABLE WORKING LENGTH : 55" (140 cm)
  • SINGLE POSITIONING MARKER (I) : 90 cm
  • DOUBLE POSITIONING MARKER (II) : 100 cm
  • TEMPORARY SHARPS HOLDER : -
  • TRIPLE POSITIONING MARKER(III) : 110 cm
  • FILTER : -
  • RAPID EXCHANGE LENGTH : 12 cm
  • SEAL-TIGHT LID : -
  • RADIOPAQUE MARKER BAND : 2 mm Proximal to Catheter Tip
  • GUIDE WIRE COMPATIBILITY : 0.014" (0.36 mm)
  • HYDROPHILIC COATING : 20 cm Distal Catheter
  • STERILIZATION : ETO
  • LATEX FREE : Yes
device-thumbnail
Aspiration Catheter
  • Model : MDR-ASAPLP
  • Procedure : -
  • FRENCH SIZE (F) : GCID 6F ≥ 0.066" (1.68 mm)
  • CATHETER USABLE WORKING LENGTH : 60" (145 cm)
  • SINGLE POSITIONING MARKER (I) : 90 cm
  • DOUBLE POSITIONING MARKER (II) : 100 cm
  • TEMPORARY SHARPS HOLDER : -
  • TRIPLE POSITIONING MARKER(III) : 110 cm
  • FILTER : -
  • RAPID EXCHANGE LENGTH : 20 cm
  • SEAL-TIGHT LID : -
  • RADIOPAQUE MARKER BAND : 2 mm Proximal to Catheter Tip
  • GUIDE WIRE COMPATIBILITY : 0.014" (0.36 mm)
  • HYDROPHILIC COATING : 30 cm Distal Catheter
  • STERILIZATION : ETO
  • LATEX FREE : Yes
device-thumbnail
Aspiration Catheter
  • Model : MMSF200
  • Procedure : -
  • FRENCH SIZE (F) : -
  • CATHETER USABLE WORKING LENGTH : -
  • SINGLE POSITIONING MARKER (I) : -
  • DOUBLE POSITIONING MARKER (II) : -
  • TEMPORARY SHARPS HOLDER : No
  • TRIPLE POSITIONING MARKER(III) : -
  • FILTER : 70 Micron
  • RAPID EXCHANGE LENGTH : -
  • SEAL-TIGHT LID : Yes
  • RADIOPAQUE MARKER BAND : -
  • GUIDE WIRE COMPATIBILITY : -
  • HYDROPHILIC COATING : -
  • STERILIZATION : -
  • LATEX FREE : -
device-thumbnail
Aspiration Catheter
  • Model : ASAPLP
  • Procedure : -
  • FRENCH SIZE (F) : GCID 6F ≥ 0.066" (1.68 mm)
  • CATHETER USABLE WORKING LENGTH : 60" (145 cm)
  • SINGLE POSITIONING MARKER (I) : 90 cm
  • DOUBLE POSITIONING MARKER (II) : 100 cm
  • TEMPORARY SHARPS HOLDER : -
  • TRIPLE POSITIONING MARKER(III) : 110 cm
  • FILTER : -
  • RAPID EXCHANGE LENGTH : 20 cm
  • SEAL-TIGHT LID : -
  • RADIOPAQUE MARKER BAND : 2 mm Proximal to Catheter Tip
  • GUIDE WIRE COMPATIBILITY : 0.014" (0.36 mm)
  • HYDROPHILIC COATING : 30 cm Distal Catheter
  • STERILIZATION : -
  • LATEX FREE : -

Questions & Answers

Don't see the answer you're looking for ?