Manufacturer > Inari Medical > Devices > FlowTriever

FlowTriever

Device-Type

Mechanical Thrombectomy

Manufacturer

Inari Medical

The First Mechanical Thrombectomy Device Indicated for Pulmonary Embolism.


Triever Aspiration Catheter

The Triever Aspiration Catheters feature a highly trackable, large lumen catheter, and large bore syringe designed to rapidly extract large volumes of clot while limiting blood loss.


New T20 Curve

The Triever20 Curve™ is a  fully braided large bore catheter with a customizable 260⁰ bend designed for improved navigability & torqueability for challenging anatomies such as the left PA rainbow, TA, IVC and CIT in RA.

Key Features:

  • Telescopic Steerability for targeted aspiration: Customizable angled tip for precise catheter placement by telescoping through the Triever24
  • 260⁰ directionality range for improved navigation: Increased utility in challenging anatomies (RA, PA, IVC, Renal Veins and upper + lower extremity DVT)
  • One Price, One Patient, Many Choices: Triever20 Curve™ is included in the FlowTriever Per Procedure Pricing to use complimentarily with any FlowTriever products.



Triever24 with FLEX Technology

The Triever24 with FLEX technology provides increased flexibility through its softer durometer jacket, featuring a highly trackable, large lumen catheter, and large bore syringe designed to rapidly extract large volumes of clot while limiting blood loss.

Key Features: 

  • 41% More Flexible than existing Triever24 catheter*
  • Superior Trackability to better navigate tortuous anatomies and smoothly deliver the catheter to the left PA and through dilated right hearts
  • Effective Aspiration to enhance Whoosh™ technique aspiration for maximum clot removal

No changes to the recommended procedure steps for the improved Triever24 Aspiration Catheter!

Triever Aspiration Catheter Sizes

Available in 3 sizes:

  • Triever16: 16 French
  • Triever20: 20 French
  • Triever24: 24 French 


FlowTriever Gen 1

The FlowTriever Catheter Gen 1 features three self-expanding nitinol mesh disks that are designed to engage, disrupt, and deliver clot to the Triever Aspiration Catheter for extraction.

Available in 4 sizes:

S (6-10 mm)

M (11-14 mm)

L (15-18 mm)

XL (19-25mm)


FlowTriever 2

The FlowTriever 2 catheter technology features a new disk shape designed to capture and remove wall adherent clot. 

Key Features: 

  • Laser cut element with proximal open cell design for optimized clot clearance
  • New disk shape designed to disrupt clot, improving effectiveness of aspiration 
  • Increased usable length (120 cm) for more distal treatment
  • 52% shorter deployment length
  • Versatile sizing to treat vessels 6-16 mm in diameter

Features and Benefits

The FlowTriever is an over-the-wire system designed to:

  • Remove clot through both mechanical and aspiration mechanisms of action
  • Capture and Remove large clot burden from big vessels
  • Treat in a single session
  • Eliminate the need for thrombolytics
  • Eliminate ICU Stay

Use Case Examples

  • The FlowTriever System is indicated for the non-surgical removal of emboli and thrombi from blood vessels
  • Injection, infusion and/or aspiration of contrast media and other fluids into or from a blood vessel
  • The FlowTriever System is intended for use in the peripheral vasculature and for the treatment of pulmonary embolism.
  • The Triever Catheters are intended for use in peripheral vasculature and for the treatment of pulmonary embolism
  • Triever Catheters are also intended for use in treating clot in transit in the right atrium
  • The FlowTriever2 Catheter is indicated for: the non-surgical removal of emboli and thrombi from peripheral blood vessels. Injection, infusion, and/or aspiration of contrast media and other fluids into or from a blood vessel.
  • The FlowTriever2 Catheter is intended for use in the peripheral vasculature.

Questions & Answers

Don't see the answer you're looking for ?